Parker BGT1202QLBS1ER323 Filter

Description

Product Description of Parker BGT1202QLBS1ER323 Filter

1. Overview

The Parker BGT1202QLBS1ER323 filter is a tank-top return line filter from the BGT500 series. It is mounted on top of the hydraulic oil tank. This filter uses a 10 micron LEIF® patented filter element and is equipped with a 1.2 bar pressure switch, suitable for 10 micron filtration requirements of hydraulic circuits with a flow rate of 500 liters per minute.

2. Technical Parameters

– Model: BGT1202QLBS1ER323
– Filter series: BGT500
– Filter element length: 12cm
– Flow rate: 500 liters per minute
– Port size: Diameter 50mm
– Filtration fineness: 10 microns
– Seal material: Nitrile rubber
– Pressure switch: 1.2 bar NO/NC switch
– Maximum working pressure: 10MPa

3. Key Features

– Uses a 10 micron LEIF® patented filter element
– Equipped with magnetic pre-filtration to remove iron contaminants
– In-to-out flow structure prevents backflow contamination
– Low hysteresis bypass valve extends service life
– Equipped with a 1.2 bar pressure switch to monitor filtration quality

4. Application Scope

Suitable for 10 micron filtration requirements of hydraulic circuits with a flow rate of 500 liters per minute.

5. Benefits

– Can achieve 10 micron filtration requirements
– Compact and lightweight structure
– Convenient filter element replacement
– Magnetic pre-filtration improves filtration efficiency
– Pressure switch can monitor filtration status

This filter is suitable for 10 micron filtration requirements of hydraulic circuits with a flow rate of 500 liters per minute, and is equipped with a pressure switch to monitor filtration quality.